Max TA551A/16-11 Manuel d'utilisateur télécharger pdf (Page 14)

ENGLISH

5. MAINTAIN FOR

PERFORMANCE

DO NOT FIRE THE STAPLER WHEN IT IS

EMPTY

USE A 3-PIECE AIRSET

Failure to use a 3-piece airset allows the

moisture and dirt inside compressor to pass

into the tool directly. This causes rust and

wear, and results in a poor operating

performance. The hose length between airset

and tool should be no longer than 5 m since a

longer length results in a reduction in air

pressure.

USE RECOMMENDED OIL

The velocite or turbine oil should be used to

lubricate the tool. Upon completion of

operations, place 2 or 3 drops of oil into the air

plug inlet with the jet oiler. (Recommended Oil

: ISO VG32)

INSPECT AND MAINTAIN DAILY OR

BEFORE OPERATION

Disconnect air supply and empty the

magazine when inspecting or maintaining the

tool.

(1) Drain air line filter and compressor

(2) Keep lubricator filled in air 3-pieces set

(3) Clean filter element of air 3-pieces set

(4) Tighten all screws

(5) Keep contact arm moving smoothly

6. STORING

When not in use for an extended period, apply

a thin coat of the lubricant to the steel parts to

avoid rust.

Do not store the tool in a cold weather

environment. Keep the tool in a warm area.

When not in use, the tool should be stored in a

warm and dry place. Keep out of reach of

children.

All quality tools will eventually require servicing

or replacement of parts because of wear from

the normal use.

7. TROUBLE

SHOOTING/REPAIRS

The troubleshooting and/or repairs shall be

carried out only by the MAX CO., LTD. authorised

distributors or by other specialists.

Supplement to the operating instruction

According to the European Norm EN 792-13 the

regulation is valid from 01.01.2001 that all

fastener driving tools with contact actuation must

be marked with the symbol “Do not use on

scaffoldings, ladders” and they shall not be used

for specific application for example:

＊when changing one driving location to another

involves the use of scaffoldings, stairs, ladders

or ladder alike constructions e.g. roof laths,

＊closing boxes or crates,

＊fitting transportation safety systems e.g. on

vehicles and wagons.

WARNING

1 2 ... 9 10 11 12 13 14 15

Commentaires sur ces manuels

Pas de commentaire

Max TA551A/16-11 Manuel d'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Max TA551A/16-11